| Base System |
|---|
|
Full Cryostat System |
 |
Turnkey optical cryostat; 3K-350K; 5nm peak to peak vibration; 10mK peak to peak temp variation. Includes compressor, control box, cryostat, and user interface. For more details, see Cryostation Datasheet |
| |
Inch |
| |
Metric |
|
Side plate on base |
 |
Side plate on sample chamber base allows access to route interfaces up into the sample chamber without relying on the optical ports. Side plates may have adapters for RF feed-throughs or gas tubes, for example. |
| |
Blank |
| |
4 x SMA |
|
1/16" gas tube
|
|
extended sample chamber option |
 |
Sample chamber is moved out 120mm from cryocooler column. useful to gain more side access to the windows near the cryocooler. For more information see Extended Sample Mount Option |
| |
|
|
| Window Options - Side Window Assembly |
|---|
| 30 mm side windows standard |
 |
Standard window assembly; four 30mm user replaceable windows; 75mm beam height. For more details, see Windows Options |
| 50 mm side windows (option) |
 |
Large window assembly; four 50mm user replaceable windows; 90mm beam height. With 53mm dia x 55mm tall chamber. For more details, see Windows Options |
| rotated 50mm side windows (option) |
 |
Large windows rotated 45 degrees; three 50mm user replaceable windows; 90mm beam height. Intended for use with 53mm dia x 55mm tall chamber. This allows larger equipment close to the opposing windows. This option works well with a base plate that allows rotation of the cryostat by 45 degrees as well. For more details, see Windows Options |
|
100mm tall window assembly with 50mm windows |
 |
This is a taller version of the 50mm side window assembly. |
|
120mm tall window assembly with no windows |
 |
This is a tall version of the window assembly that was created without windows. This can be used for applicatinos where only top access is required. |
| Window Options - Top Window |
|---|
| 30 mm top windows standard |
|
|
| 50 mm top windows (option) |
|
|
| with option for low working distance on top |
|
Includes ultra thin top windows to allow 1mm working distance. For more details, see Windows Options |
| Window Options - Bottom Window |
|---|
30 mm bottom windows option
no thermal link for vertical through beam |
 |
This provides six windows on the sample space. It works well with the sample shelf and standoff option or with a hole in the optical table. For more details, see Windows Options |
30mm bottom window option
with thermal link for low working distance |
 |
Same as above, but the thermal link is intended for low working distance on the bottom port only. For more details, see Windows Options |
Window Material:
|
 |
Window materials:
- Fused Silica,
- BK7
- Calcium Fluoride,
- Sapphire
- Aluminized Kapton
- For more details, see Windows Options
|
| Extended Sample Chamber Option |
|---|
| extended sample chamber option |
 |
Sample chamber is moved out 8" from cryocooler column. Reduces base temperature by about 2 degrees. For more information see Extended Sample Mount Option |
| Attocube Piezo Motion Stages Option |
|---|
Attocube nanopositioning insert option
Indicate which stages you want to use:
|
 |
Includes recessed pocket to hold Attocube or other stages below main level. Must specify which Attocube stages to use.
| ANP*51 |
x,y, or z to 3mm |
| ANP*101 |
x,y, or z to 5mm |
| ANG |
tilt |
| ANR |
rotation about z or x |
| ANS |
scanning in x,y, or z |
Includes flexible thermal links. For more information see Attocube Stage Option |
| External Connection Options |
|---|
| 29 electrical connections standard |
|
|
| RF (coax) via SMA feedthrough option |
 |
This uses an optical port. Has SMA connector on inside and outside. For more information see Coax Feedthrough Option |
|
Fiber optic feedthrough option (FC connector) |
 |
This uses an optical port. Has FC connector on inside and outside. Other fiber connectors are available. For more information see Fiber Optic Feedthrough Option |
| Thermally Damped Electrical Sample Mount Option |
|---|
Number of removable mounts requested:
|
 |
High conductivity electrical mount. Allows 15 electrical connections to sample. Mounts easily to top of sample post. For more information see Thermally Damped Electrical Sample Mount Info |
| Magneto-Optical Option |
|---|
Tell us what your magnetic requirements are:
|
| UHV Option |
|---|
Tell us what your vacuum space requirements are:
|
| Sample in Gas Option |
|---|
|
 |
The sample in gas option is only compatible with a few of the options above. This allows the user to have a separate cold environment around a sample, and still have full control of the surrounding gas pressure. For more information see Sample in Gas Option. Contact Montana Instruments for details. |
